Double Ribbed Galvanized Angle Lintel Bar
• The lintels are available in two sizes to suit all residential builds:
Sizes:
100 x 100 x 6mm
150 x 100 x 6mm
Length range:
900/1200/1500/1800/2100/2400/2700mm
1800/2100/2400/2700/3000/3300/3600/4000mm
Features:
Slotted design to support brickwork over openings where a rendered finish is required.
Gen III design provides maximum adhesion with the introduction of slits on the horizontal and vertical of the lintel creating an excellent mechanical bond for the render.
New heel profile design makes it easier for brick installation.
Manufactured in accordance with AS/NZS 3679.1 – 300MPa
Fully Hot-Dip Galvanised to AS/NZS4680.Galvanized coat more than 85um (600g/m2)
Achieves R3 Durability Rating to AS/NZS2699.3.
Compliant with relevant Australian Building Codes & Australian Standards.
Australian designed and manufactured.
Full product warranty.
Stamped.
Labelled & bar coded.
Benefits:
Superior performance
Long life and durability
Easy identification
| Side 1 | Side 2 | Thickness | Weight |
|---|---|---|---|
| 60mm | 60mm | 6mm | 5.42kg/m |
| 75mm | 100mm | 6mm | 7.98kg/m |
| 75mm | 125mm | 6mm | 9.16kg/m |
| 75mm | 100mm | 8mm | 10.3kg/m |
| 75mm | 125mm | 10mm | 14.2kg/m |
| 80mm | 80mm | 6mm | 7.34kg/m |
| 80mm | 80mm | 8mm | 9.63kg/m |
| 100mm | 100mm | 6mm | 9.16kg/m |
| 100mm | 100mm | 8mm | 11.8kg/m |
| 100mm | 100mm | 10mm | 14.9kg/m |
| 125mm | 125mm | 8mm | 14.9kg/m |
| 125mm | 125mm | 10mm | 18kg/m |